叠加原理
分子动力学
材料科学
压力(语言学)
磨料
研磨
限制
热的
硅
干扰(通信)
机械
复合材料
曲面(拓扑)
动力学(音乐)
平滑的
时间-温度叠加
表面光洁度
咬边
表面应力
表面粗糙度
分布(数学)
分子物理学
热流密度
各向异性
作者
Meng Li,Pengyue Zhao,Di Chang,Bingxu Chen,谭久彬 Tan Jiubin
标识
DOI:10.1088/1361-6463/aeb9f2
摘要
Abstract To elucidate how dual-abrasive superposition governs material removal and surface integrity during nanogrinding of initially rough single-crystal silicon, molecular dynamics simulations were performed at abrasive spacings of L = 2–10 nm. A sequential dual-abrasive model was used to characterize atomic displacement, grinding forces, thermal and stress responses, radial distribution functions, and subsurface structural evolution. The results show that abrasive spacing controls a transition from strongly coupled superposition to increasingly independent grinding. At L = 2–6 nm, the trailing abrasive reprocesses the preformed groove, suppressing chip accumulation, smoothing the machined surface, reducing tangential and normal forces, and limiting subsurface damage. At L = 8–10 nm, the superposition effect weakens and separate grinding tracks develop, accompanied by higher average temperature, stronger local stress concentration, increased high-coordination structures, and a thicker subsurface damage layer. The orthogonal force increases under stronger superposition because of enhanced lateral interference between abrasives. These findings reveal the spacing-dependent atomic mechanisms of surface reconstruction, local structural evolution, and subsurface damage, providing a mechanistic basis for controlling surface integrity in multi-abrasive nanogrinding.
科研通智能强力驱动
Strongly Powered by AbleSci AI