材料科学
电极
电化学
极化(电化学)
电解
克拉克电极
电解质
氧化物
化学工程
析氧
氧气
无机化学
功率密度
立方氧化锆
化学修饰电极
吸附
电流密度
钯氢电极
电化学电池
高温电解
电解槽
催化作用
电解水
工作电极
电化学能量转换
电催化剂
纳米技术
表面改性
可逆氢电极
作者
Jinghui Zhang,Dong-Chu Lu,Yuan Gao,Chang‐Jiu Li,Scott A. Barnett,Shan-Lin Zhang
标识
DOI:10.1021/acsami.6c15027
摘要
Recent advancements in solid oxide electrochemical cells (SOCs) heavily depend on the development of active and stable oxygen electrodes that exhibit superior activity and stability for oxygen reduction and evolution reactions at low temperatures. Here, we report a new surface-constructed oxygen electrode, Sr(Mg,Ti,Fe)O3-δ coated with Co3O4 (SMTF-Co3O4), designed to operate below 500 °C for low-temperature SOCs. The electrode electrochemical performance is primarily improved by the in situ reaction of Co3O4 with surface-segregated SrO, forming SrCoO3 and Co3O4/SrCoO3/SMTF heterointerfaces, which significantly enhances the surface oxygen adsorption capacity. The SMTF-Co3O4 electrode demonstrates a remarkably low reaction activation energy of ∼0.56 eV, with electrode polarization resistance as low as 0.56 Ω cm2 at 450 °C. The full cell, incorporating a thin scandia-stabilized zirconia (ScSz) electrolyte (∼3 μm) and the SMTF-Co3O4 oxygen electrode, reaches maximum power density and electrolysis current density (at 1.3 V) of 0.6 W/cm2 and 0.44 A/cm2, respectively, at 500 °C. Especially, 5-8 times enhancement in the cell performance at 450 °C is achieved by SMTF with the surface construction compared to the pristine electrode. Furthermore, the SMTF-Co3O4 electrode maintains stable performance in both fuel cell and electrolysis modes.
科研通智能强力驱动
Strongly Powered by AbleSci AI