材料科学
晶体孪晶
部分位错
微观结构
变形(气象学)
位错
变形机理
金属间化合物
层状结构
极限抗拉强度
滑倒
复合材料
纳米
几何学
数学
合金
作者
Guoming Zheng,Bin Tang,Songkuan Zhao,Yizhen Xie,William Yi Wang,Jinshan Li,Lei Zhu
标识
DOI:10.1016/j.msea.2023.145138
摘要
Generally, dislocation slipping and mechanical twinning govern the plastic deformation of lamellar microstructure (LM) in TiAl intermetallics. However, when the interlamellar spacing is reduced to the nanometer scale, the deformation mechanism switches to another mode, triggering different mechanical responses. This work reveals that the development of long-period stacking-ordered (LPSO) structure along the lamellar interface, such as the 9R and 6H structures, dominates the tensile plastic deformation of nano-LM. The formation of two LPSO structures is due to the gliding of the 1/6 <11 2‾ > Shockley partial dislocations on the (111) close-packed plane. In particular, the periodic alternating gliding of Shockley partial dislocations on every third layer of atoms and continuous gliding of Shockley partial dislocations on three neighboring planes result in 9R and 6H structures, respectively. LPSO formation during deformation can induce greater high-temperature yield strength compared to LMs deformed via dislocation gliding or mechanical twinning. These findings advance the understanding of the deformation mechanism of nano-LM and pave a new route for designing TiAl alloys with better high-temperature mechanical performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI