暗电流
材料科学
光电流
响应度
光电子学
退火(玻璃)
光电探测器
电极
肖特基势垒
化学气相沉积
二极管
冶金
化学
物理化学
作者
Zeyulin Zhang,Qingwen Song,Hao Yuan,Fengyu Du,Runping Ma,Dinghe Liu,Yuming Zhang,Pengru Yan,Dazheng Chen,Chunfu Zhang,Yue Hao
标识
DOI:10.1002/pssr.202300172
摘要
There is a tradeoff between the high photocurrent and the low dark current for the gallium oxide (Ga2O3) metal–semiconductor–metal photodetectors (PDs). Achieving a balance between the photocurrent and dark current is crucial to the final device's performance. Herein, indium zinc oxide (IZO) is introduced between the Ga2O3 and the metal contact for the first time. By adjusting the IZO interlayer thickness and the annealing temperature, the barrier height between Ga2O3 and the metal contact can be well controlled. In detail, the β‐Ga2O3 film is epitaxially grown by mist chemical vapor deposition, and the different thicknesses of IZO are deposited under Ti/Au electrode. The devices with 10 nm IZO interlayer and 300 °C annealing temperatures have an obvious device performance improvement, which has achieved responsivity (R) of 508 A W−1, a high peak detectivity (D*) of 2.65 × 1015 Jones, and a raised‐up relaxation time of 0.25 s (fast) and 1.22 s (slow). Compared with the device without IZO, the performances get obviously enhanced. Hence, the work hopes to promote the development of the β‐Ga2O3 solar‐blind deep UV PDs.
科研通智能强力驱动
Strongly Powered by AbleSci AI