木质素
杂原子
碳化
碳纤维
比表面积
化学工程
超级电容器
材料科学
分馏
化学
有机化学
电化学
吸附
电极
复合材料
催化作用
物理化学
工程类
复合数
戒指(化学)
作者
Wei Li,Guanhua Wang,Wenjie Sui,Ting Xu,Lin Dai,Chuanling Si
标识
DOI:10.1016/j.indcrop.2023.117276
摘要
Sustainably sourced lignin is a desired precursor for carbon materials due to its cross-clinked aromatic structure and high carbon content. However, the heterogeneity of lignin feedstock presents non-negligible effects on its physicochemical properties and thereby substantially influences its applications in carbon materials fabrication. In this work, fractionation of corn stalk enzymatic hydrolysis lignin via a simple two-step ordinal dissolution was adapted to reduce lignin heterogeneity and further improve the microstructure and electrochemical performances of lignin-derived heteroatom-doped carbon materials. The results revealed that the fractionation process successfully obtained three lignin fractions with sequentially increasing molecular weight and specific surface area. When the three lignin fractions were subjected to carbonization/activation to fabricate N/P/S co-doped carbon, the F3-derived carbon material (LC-F3) showed the highest specific surface area (2022.4 m2/g) and the best heteroatom doping effect due to the improved activation process resulted from the largest specific surface area of F3. Moreover, the good thermal stability of F3 also contributed to the maintenance of disordered structure during carbonization. Therefore, LC-F3 exhibited excellent specific capacitance (337.2 F/g, 0.5 A/g) and cycling stability (96.5% after 10,000 cycles) as a consequence of its high disordered level, heteroatom doping density and specific surface area. Consequently, this work systematically evaluates the effects of lignin fractionation on the physicochemical structural and electrochemical performances of the carbon materials and further proposes a simple strategy to enhance electrochemical properties of the heteroatom-doped carbon materials through lignin fractionation.
科研通智能强力驱动
Strongly Powered by AbleSci AI