Effects of activated carbon particle size on the formation of hydrate in fully/partially saturated liquid phase system

As a porous medium with rich pore structure, activated carbon (AC) was once considered the best carrier for hydrate storage and transportation. However, the harsh conditions of the hydrate reaction in the wet carbon environment have always limited the sufficient and rapid formation of hydrate. Therefore, the influences of particle size (4–8, 8–16, 20–40 and 100 mesh) and liquid phase saturation (fully/partially saturated) in the sodium dodecyl sulfate system on hydrate reaction were investigated. The results showed that small particle in the fully saturated liquid phase system led to the increase in hydrate generation rate, with the highest hydrate reaction rate of 3.16 mmol/min in the 100 mesh AC layer, which was 1.7–2.9 times higher than other AC layers. The gas storage capability of the 4–8 mesh AC layer with a water saturation of 70% was the highest among all systems, reaching 0.198 mol/mol. The saturation of the liquid phase induced the nucleation and growth of hydrates. Adherently growing hydrates of fully saturated liquid phase systems and mushroom-like hydrates of partially saturated liquid phase systems were found in turn. This research facilitates the commercialization of AC-based hydrate technology.