Magnetomechanical Properties of Fe-Si-B and Fe-Co-Si-B Metallic Glasses by Various Annealing Temperatures for Actuation Applications

Fe-based amorphous alloys have advantages of low iron loss and high effective permeability, which are widely used in sensors and actuators. Power efficiency is one of the most important indicators among power conversion applications. We compared the magnetomechancial power conversion factors of metallic glassy ribbons FeCoSiB (Vitrovac 7600) and FeSiB (Metglas 2605SA1). We investigated the crystallization process under different annealing temperatures and tested the magnetomechancial coupling factors (k) and quality factors (Q) by using resonant and anti-resonant methods. We found that the maximum coupling factor of the annealed Vitrovac ribbons was 23% and the figure of merits k2Q was 4–7; however, the maximum coupling factor of the annealed Metglas ribbons was 73% and the maximum value of k2Q was 16. We can observe that the Metglas 2605SA1 ribbons have higher values of the magnetomechanical power efficiency than those of the Vitrovac 7600 ribbons, which means they are better to be used in subsequent research regarding acoustically driven antennas.