A multifunctional adsorbent based on 2,3-dimercaptosuccinic acid/dopamine-modified magnetic iron oxide nanoparticles for the removal of heavy-metal ions

Overexploitation of nature by humans has led to an increasingly serious issue of heavy-metal water pollution. To reduce the threat of water pollution to humans and the environment, it is imperative to develop or improve the water treatment technology for heavy-metal-containing wastewater. Functionalized Fe3O4 magnetic nanoparticles (Fe3O4 MNPs) have been widely used as effective adsorbents for the removal of heavy-metal ions from water owing to their high efficiency, low cost, selective adsorption ability, and recyclability. In this study, Fe3O4@DA-DMSA magnetic nanoparticles (FDDMs) were prepared by the functionalization of Fe3O4 MNPs with environmentally friendly dopamine (DA) and a heavy-metal detoxifying agent such as 2,3-dimercaptosuccinic acid (DMSA) for the efficient and rapid adsorption of Pb2+, Cu2+, and Cd2+, with maximum adsorption capacities of 187.62, 63.01, and 49.46 mg/g, respectively. FDDMs exhibited the best ability to remove Pb2+ with a maximum adsorption capacity than that of the most reported Fe3O4 MNP-related adsorbents. In actual wastewater and multi-component simulated water samples contaminated with Pb2+, Cu2+, and Cd2+, the as-prepared adsorbent maintained a good removal ability for Pb2+ with low influence by ionic strength and interfering ions, as well as exhibited an excellent selectivity. According to the results of batch experiments and X-ray photoelectron spectroscopy (XPS) analysis of the adsorbent before and after adsorption, the adsorption mechanism of the adsorbent for the removal of heavy-metal ions mainly involves coordination and ion exchange. In addition, the adsorbent exhibited a good regeneration performance. Therefore, FDDMs can be considered as a promising adsorbent for the treatment of heavy-metal wastewater.