Bilayering Enables Faster Charging and High Areal Capacity of Na-Ion Electrodes

作者
Galen Brown,Stanislaw Piotr Zankowski,Patrick S. Grant
出处
期刊:Meeting abstracts [Institute of Physics]
卷期号:MA2024-02 (9): 1312-1312
标识
DOI:10.1149/ma2024-0291312mtgabs
摘要

Sodium-ion batteries (NIBs) are a promising alternative to lithium-ion batteries (LIBs), which currently dominate electric vehicle and portable device applications. But while NIBs have potential cost and safety advantages, they still lag behind LIBs in capacity, power output and longevity. Considerable research and development effort is now being expended to develop more energy-dense electrodes in order for NIBs to become commercially viable. A possible route to increasing the energy density of NIBs is to increase electrode thickness (and therefore areal capacity), from presently used ~50 μm to 100 - 150 μm. However, achieving this in practice is limited by multiple factors related to manufacturing and rate performance of thicker electrodes. Slot-die coating is the dominant manufacturing process for electrodes, which involves mixing of active material, conductive additive, binder and solvent, coating the resulting slurry onto current collecting foil, and drying. The drying step places a practical limit on the dried thickness, as it is accompanied by binder migration away from the current collector, potentially reducing the adhesion and mechanical strength of the electrode. As a result, the maximum thickness of electrodes in industry is typically constrained to 50 - 90 µm. Furthermore, given the mobility of Na ions in the electrolyte in the torturous electrode pore network is normally restricted, thicker electrodes undergo greater polarisation and capacity loss as C-rate (current density) is increased. This means thicker electrodes cannot be charged/discharged quickly without detriment to energy density. Here we present a novel bilayer architecture of Na-ion positive electrodes obtained through slurry casting two successive sub-layers of different active materials: sodium manganese oxide (Na0.7MnO2, NMO) and sodium vanadium phosphate (Na3V2(PO4)3, NVP). The bilayer electrodes are 100 µm thick with high areal loading of ≈17 mg/cm2, which might normally be expected to inhibit high-rate performance. As expected, for low current densities < 1C ≡ 45 mA/gcm2, the charge capacity of the bilayer cathodes is similar and comparable to a simple, homogeneous (i.e. random) mixture of the two active materials, regardless of how the sub-layers are arranged. However, at 2C and 3C, overall electrode capacity is revealed to be sensitive to the microstructural arrangement, such as the relative position of NMO and NVP sub-layers. There is a significant increase in retained capacity when the NMO sub-layer is on the current collector. In order to understand the sensitivity of overall capacity to structural arrangement, simulations were performed that are formulated in a way to capture the designed microstructural heterogeneity of the electrodes. The simulations show the complex interaction between the voltage-capacity profile of the active material, the relative position of the sub-layer, and the evolution of Na ion gradients through the thickness of the electrode. In the most favourable arrangement, the dispersion of local overpotential due to local concentration polarization effects is reduced, which in turn enables greater utilization of the active materials. The sensitivity of sub-layer position is shown to relate to the significant difference in voltage-capacity profiles of NMO and NVP. Differences in charge-transfer resistance, electrical conductivity, and ionic mobility within the two materials also have a role in how the critical Na ion concentration profile evolves through the charge/discharge cycle. We discuss how the concept of layered or other types of structured electrode might be applied to Na ion batteries, and to what extent these effects might increase the competitiveness of Na ion batteries compared with their more established LIB counterparts. Figure 1

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
快乐如云朵完成签到 ,获得积分10
刚刚
RichardGuo完成签到 ,获得积分10
刚刚
李健的小迷弟的应助被hepote采纳,获得10
刚刚
友好小刺猬完成签到,获得积分10
1秒前
六六完成签到,获得积分10
1秒前
tcy露完成签到,获得积分10
2秒前
2秒前
3秒前
4秒前
可可完成签到,获得积分10
5秒前
5秒前
yofaz完成签到,获得积分10
5秒前
宁静致远完成签到,获得积分10
5秒前
5秒前
苹果画板发布了新的文献求助10
5秒前
JamesPei的应助被缓慢绿草采纳,获得10
6秒前
Ava的应助被郗XI采纳,获得10
6秒前
六六发布了新的文献求助30
6秒前
852的应助被贾文浩采纳,获得10
6秒前
6秒前
Owen的应助被精明机器猫采纳,获得10
6秒前
6秒前
在研究里遨游的小鱼完成签到,获得积分10
7秒前
7秒前
Lucas的应助被你好采纳,获得10
7秒前
6666的应助被CarryLJR采纳,获得30
8秒前
8秒前
9秒前
9秒前
开心的畅畅完成签到 ,获得积分10
9秒前
9秒前
9秒前
huicheng的应助被嘻嘻哈哈采纳,获得310
9秒前
cdercder的应助被369ninja采纳,获得10
10秒前
稳重的秋天完成签到,获得积分10
10秒前
10秒前
btsforever完成签到 ,获得积分10
11秒前
万能图书馆的应助被李子采纳,获得10
11秒前
11完成签到,获得积分20
13秒前
syq完成签到,获得积分10
13秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
plantTFDB 508
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8168144
求助须知:如何正确求助?哪些是违规求助? 9561199
关于积分的说明 21759542
捐赠科研通 7759434
什么是DOI,文献DOI怎么找? 3429948
关于科研通互助平台的介绍 2553742
邀请新用户注册赠送积分活动 2474463