壳聚糖
硫醇
絮凝作用
化学工程
化学
材料科学
高分子化学
有机化学
工程类
作者
Yuelong Zhao,Peng Zhang,Wei Zhang,Yali Fan
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2023-02-23
卷期号:15 (5): 1117-1117
被引量:8
标识
DOI:10.3390/polym15051117
摘要
In this study, CTS-GSH was prepared by grafting thiol (–SH) groups onto chitosan (CTS), which was characterized through Fourier Transform Infrared (FT-IR) spectra, Scanning Electron Microscopy (SEM) and Differential Thermal Analysis–Thermogravimetric Analysis (DTA-TG). The performance of CTS-GSH was evaluated by measuring Cr(VI) removal efficiency. The –SH group was successfully grafted onto CTS, forming a chemical composite, CTS-GSH, with a rough, porous and spatial network surface. All of the molecules tested in this study were efficient at removing Cr(VI) from the solution. The more CTS-GSH added, the more Cr(VI) removed. When a suitable dosage of CTS-GSH was added, Cr(VI) was almost completely removed. The acidic environment at pH 5–6 was beneficial for the removal of Cr(VI), and at pH 6, the maximum removal efficiency was achieved. Further experimentation showed that with 100.0 mg/L CTS-GSH for the disposal of 5.0 mg/L Cr(VI) solution, the removal rate of Cr(VI) reached 99.3% with a slow stirring time of 8.0 min and sedimentation time of 3 h; the presence of four common ions, including Mg2+, Ca2+, SO42− and CO32−, had an inhibitory effect on CTS-GSH’s ability to remove Cr(VI) from the aqueous solution, and more CTS-GSH was needed to reduce this inhibiting action. Overall, CTS-GSH exhibited good results in Cr(VI) removal, and thus has good potential for the further treatment of heavy metal wastewater.
科研通智能强力驱动
Strongly Powered by AbleSci AI