纳米流体
热液循环
表征(材料科学)
水热合成
材料科学
化学工程
提高采收率
纳米技术
矿物学
石油工程
纳米颗粒
化学
工程类
作者
Camila Louyse Oliveira da Rocha,Ana Leticia Santos,Paulino Vasco Mariano Muguirrima,Gregory Vinicius Bezerra de Oliveira,Armando Monte Mendes,Marcos Allyson Felipe Rodrigues,Antônio Eduardo Martinelli
出处
期刊:ACS omega
[American Chemical Society]
日期:2025-09-03
卷期号:10 (36): 41547-41560
被引量:7
标识
DOI:10.1021/acsomega.5c05087
摘要
High Resolution Image Download MS PowerPoint Slide Nanoparticles are increasingly used in enhanced oil recovery (EOR) due to their resistance to harsh conditions and effective oil dispersion. Al 2 O 3 nanoparticles, in particular, can reduce interfacial tension (IFT) and alter rock wettability, improving oil mobility. This study synthesized γ-Al 2 O 3 nanoparticles via a low-temperature, short-duration hydrothermal method, prepared nanofluids, and evaluated their performance in medium-viscosity oil recovery. Nanoparticles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and BET surface area analysis. Nanofluids were prepared in saline solution at different concentrations and assessed for colloidal stability by UV–vis spectroscopy and sedimentation tests, along with rheological properties and interactions with rock and oil. EOR tests used Buff Berea sandstone plugs. XRD confirmed γ-Al 2 O 3 formation without secondary phases. FTIR, FESEM, and BET analyses showed characteristic alumina bonds, uniform nanoplate morphology, and high specific surface area. The 0.01 wt % nanofluid remained stable for 2 h, while higher concentrations resulted in sedimentation and aggregation. Nanofluids exhibited Newtonian behavior with viscosity similar to water. IFT decreased as nanoparticle concentration increased; however, efficiency dropped at 0.10 wt % due to agglomeration. Wettability tests after 24 h indicated that 0.01 wt % reduced the contact angle to 64°, whereas 0.05 and 0.10 wt % fully reversed wettability (0°). In oil recovery, 0.10 wt % γ-Al 2 O 3 nanofluid achieved the highest recovery (>29%) versus brine (26.31%). Appropriate nanoparticle concentration is essential to optimize recovery efficiency.
科研通智能强力驱动
Strongly Powered by AbleSci AI