材料科学
微观结构
电阻率和电导率
极限抗拉强度
复合材料
电导率
内容(测量理论)
冶金
电气工程
物理化学
数学
工程类
数学分析
化学
作者
Hongyu Xu,Hai-feng Jia,Zesheng Ji,Mingliang Li,Yu Han,Bo Jiang,Ye Wang,Maoliang Hu
出处
期刊:China Foundry
[Springer Nature]
日期:2025-03-28
卷期号:22 (4): 385-394
被引量:16
标识
DOI:10.1007/s41230-025-4101-6
摘要
Lightweight aluminum alloy conductor materials (Al-Mg-Si alloys) require not only high electrical conductivity to reduce electrical loss, but also high strength to withstand extreme weather conditions. To improve electrical conductivity and mechanical properties of Al-Mg-Si alloy simultaneously, the rare earth La was introduced to modify the Al-Mg-Si alloy. The effect of La addition on the microstructure, tensile properties and electrical conductivity of cast Al-Mg-Si alloy was investigated systematically. Results indicate that the appropriate La content is helpful to improve the strength and electrical conductivity of Al-Mg-Si alloys. When the addition of La is 0.2wt.%, the α-Al grains are refined apparently, Mg and Si solute atoms in the Al matrix are reduced by the formation of Mg 2 Si phase; the distribution of Al 11 La 3 phases is uniform, and the morphology of AlFeSi phase transforms from continuous state to discontinuous state. The Al-Mg-Si-0.2La alloy exhibits the optimal tensile properties and electrical conductivity, with an ultimate tensile strength of 170 MPa, a yield strength of 88 MPa, an elongation of 18.9%, and an electrical conductivity of 44.0% IACS. These values represent improvements of 9.0%, 15.8%, 70.3%, and 17.3%, respectively, compared to the Al-Mg-Si alloy without La addition. However, excessive La deteriorates the properties of Al-Mg-Si- x La alloys.
科研通智能强力驱动
Strongly Powered by AbleSci AI