Comparative analysis of thermo-physical and mechanical properties of PALF/CF/epoxy resin with and without nano TiO2 filler

The performance of an engineering material depends on its potentiality and characterization under different mechanical and thermal test environments. The present research study has revealed the performance of a new class of hybrid composites, focused specially on the general trends observed in their impact of fabrication and its properties. To investigate how the mechanical and thermal qualities of the epoxy matrix may be improved, pineapple leaf fibre and carbon fibre were particularly chosen. By embedding the selected filler into the Pineapple leaf Fiber/Carbon Fiber(PALF/CF) reinforced epoxy resin, coordination effects, impact of embedding were achieved in the form of modified mechanical and thermal properties. The present research work is focused to perform the thermal and mechanical properties of pineapple leaf fiber/carbon fiber reinforced epoxy resin(ER) composites with and without particulate nano TiO2 fillers. The comparison of hybrid fibre (carbon and pineapple leaf fibre) reinforced epoxy composites with and without particulate nano TiO2 fillers was done. The results of the mechanical tests demonstrated that, in comparison to all other composites, the inclusion of nano fillers improved the tensile, flexural, and impact strengths. Nano particle reinforced with hybrid composite has a score of 23.4, whereas clean epoxy only gets a score of 4.5. It follows from this example that the presence of nanoparticles raises the residual values.