Smart underwater sensor alerts when wearer is drowning

Nickel-rich layered LiNixCoyMn1-x-yO2 (NCM, x ≥ 0.83) is considered as a promising cathode material for lithium-ion batteries (LIBs), owing to its satisfying specific energy. However, the undesired phase transformation from layered into rock-salt at the NCM surface will easily induce Li concentration gradient during cycling, which hinders the Li-ions diffusion and leads to the gradual accumulation of inner stress with the appearance of microcracks. Herein, we propose a surficial engineering strategy to promote the Li-ions transmission for single-crystalline LiNi0.83Co0.11Mn0.06O2 (SCNCM) via Li1.3In0.3Ti1.7(PO4)3 (LITP) modification. It is noted that, as the fast Li-ion conductor, LITP can accelerate the Li-ions diffusion and alleviate the electrode–electrolyte side reaction simultaneously. More importantly, LITP can serve as the Li-ions regulator, ensuring the homogeneous distribution of Li-ions and minimizing the concentration difference at SCNCM surface. It can relieve the stress induced by the inconsistent Li-ions dispersion, which effectively decreases the degree of structural disordering and lattice mismatch at surface, eventually maintaining the high structure integrity during long-term cycling. As anticipated, even under the harsh testing conditions, the LITP modified SCNCM still can achieve a satisfied reversible capacity of 196.4 mAh g−1 under potential range of 2.75–4.6 V after 200 cycles at 25 °C in coin-type half-cells. Furthermore, it provides an extraordinary capacity retention of 88% in 2.75–4.3 V after 400 cycles at high temperature of 45 °C in pouch-type full-battery.