等温淬火
材料科学
奥氏体
冶金
同质性(统计学)
球墨铸铁
铸造
结构材料
结构稳定性
铸铁
复合材料
微观结构
贝氏体
结构工程
统计
工程类
数学
作者
Marcin Górny,Łukasz Gondek,Giuliano Angella,Edward Tyrała,M. Kawalec,Adam Bitka
标识
DOI:10.1007/s43452-022-00597-0
摘要
The structural stability of ausferrite in thin-walled Austempered Ductile Iron (ADI) castings with 5 mm wall thickness is compared to a reference casting with 25 mm wall thickness. The thin-walled and reference castings were first austenitized between 850 and 925 °C, and then austempered between 250 and 380 °C. X-ray diffraction (XRD) investigations with changing temperature were performed between − 260 up to + 450 °C to investigate the change of phase fraction, lattice parameters and strain in ausferrite. The role of the austenitization temperature on structural stability and homogeneity of the investigated ADI castings has been provided. In addition, the problem of the occurrence of “blocky” high-carbon austenite that was not completely involved during austempering, has been taken into account. Finally, it has been shown that the thin-walled castings provided higher structural homogeneity and stability if compared to the reference castings.
科研通智能强力驱动
Strongly Powered by AbleSci AI