推进剂
高氯酸铵
集聚经济
燃烧
自燃温度
点火系统
差示扫描量热法
材料科学
粒径
化学工程
化学
铝
分析化学(期刊)
复合材料
色谱法
有机化学
热力学
物理化学
工程类
物理
作者
Dongliang Gou,Xiangyun Hu,Wen Ao,Peijin Liu,Guoqiang He
标识
DOI:10.1002/prep.202300147
摘要
Abstract Aluminum trihydride (AlH 3 ) has gained considerable attention as a substitute fuel for aluminum in solid propellants. In this study, we conducted a systematic investigation to evaluate the effects of AlH 3 content, ranging from 0 % to 18 %, on propellant ignition, combustion, and agglomeration. Experimental methods such as thermogravimetry−differential scanning calorimetry (TG‐DSC), laser ignition, high‐speed photography, and collecting condensed combustion products (CCPs) were employed. The results indicate that AlH 3 significantly promotes the high‐temperature decomposition of ammonium perchlorate (AP). Meanwhile, the addition of cyclotetramethylene tetranitramine (HMX) in propellant does not affect the hydrogen release reaction of AlH 3 . As the AlH 3 content increases from 0 % to 18 %, the spectral emission intensity of the propellants decreases, and the ignition delay time initially increases from 253 ms to 321 ms, and then decreases to 258 ms. Furthermore, the burning rate increases with increasing the AlH 3 content, while the pressure exponent is reduced from 0.551 to 0.460. The inclusion of AlH 3 in propellants significantly inhibits aluminum agglomeration near the burning surface. Additionally, as the AlH 3 content increases, the mean particle size D 43 of the CCPs decreases from 50.95 μm to 8.28 μm at 1 MPa. The agglomeration degree of aluminum is very weak at 7 MPa, especially when the AlH 3 content exceeds 9 %. The conclusions drawn from this study can serve as valuable guidance for optimizing propellant formulations.
科研通智能强力驱动
Strongly Powered by AbleSci AI