尖晶石
材料科学
X射线光电子能谱
涂层
合金
复合数
扫描电子显微镜
氧化物
冶金
化学工程
转化膜
固体氧化物燃料电池
复合材料
电极
电解质
工程类
物理化学
化学
作者
Zhang‐Bo Ma,Yuan‐Shuo Zhang,Hao Zhang,Mingang Zhang,Yong‐Tang Li,Wen Yang
摘要
The preparation and performance improvement of the spinel coating on the surface of ferritic alloy is of wide interest for its application in the metallic interconnects of the solid oxide fuel cells (SOFCs). The CoMn 2 O 3 composite coating is prepared on the surface of the Crofer alloy by the composite electrodeposition method. A step‐heating thermal conversion process is subsequently used to convert the composite coating into a spinel coating, while a direct‐heating process is implemented as the control experiment. Isothermal oxidation tests are then carried out for the prepared samples in order to present the high temperature performance. Scanning electron microscopy (SEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and area‐specific resistance (ASR) are used to analyze the properties of the matrix and coatings. The experimental results reveal that the coatings by step‐heating thermal conversion exhibit better performance of electrical conductivity and oxidation resistance than the coatings by direct‐heating process. Furthermore, with the increase of oxidation time, the atomic proportion of Cr element diffusing to the surface of the matrix is maintained at about 3%–4% for the samples with spinel coatings by step heating, which effectively prevent the Cr volatilization in the matrix. The preparation of spinel coatings on the ferritic alloy by composite electrodeposition and step‐heating thermal conversion is helpful to stimulate new ideas for the development of reliable and cost‐effective metallic interconnect.
科研通智能强力驱动
Strongly Powered by AbleSci AI