材料科学
过电位
铜
钯
多孔性
吸附
化学工程
金属泡沫
多孔介质
储能
电流(流体)
能量密度
能量(信号处理)
复合材料
清洁能源
纳米技术
金属
能量转换
作者
Wenwen Zhang,Chaoyang Li,Yuchen Sun,Yuxin Hong,Yan Wu,Shanshan Yao
标识
DOI:10.1021/acsami.6c05817
摘要
Rechargeable Li-CO2 batteries are attractive for next-generation energy storage owing to their high theoretical energy density and capability for CO2 utilization. However, their practical application is hindered by sluggish reaction kinetics, large polarization, and poor cycling stability associated with the reversible formation and decomposition of Li2CO3. Herein, we report a free-standing cathode consisting of palladium nanoparticles uniformly anchored on copper (Pd NPs@Cu) foam, fabricated via a facile one-step galvanic displacement-assisted deposition strategy. The three-dimensional porous architecture combined with highly dispersed Pd nanocatalysts enables enhanced catalytic activity and mass transport, thereby effectively accelerating both CO2 reduction and evolution reactions. The Pd NPs@Cu foam composite delivers a high discharge capacity exceeding 15,000 mAh g–1, excellent rate capability (up to 2000 mA g–1), and outstanding cycling stability with an ultralow overpotential of ∼0.36 V over 160 cycles (1600 h) at 25 °C and 200 mA g–1. Even at the high current density of 1000 mA g–1, stable cycling over 141 cycles is achieved with a low overpotential of ∼0.6 V. Notably, the system demonstrates robust low-temperature performance, sustaining 64 cycles at 0 °C (250 mA g–1) with charge potentials below 4.0 V in the conventional ether-based electrolyte without any additives. Mechanistic investigations combining in situ electrochemical impedance spectroscopy coupled with distribution of relaxation times (in situ EIS-DRT) analysis and ex situ structural characterizations (SEM, XRD, FTIR, and XPS) confirm the highly reversible formation and decomposition of Li2CO3 and reveal that charge-transfer processes dominate the reaction kinetics. Density functional theory (DFT) calculations further demonstrate that Pd incorporation significantly strengthens the adsorption of key intermediate *LiCO3, thereby lowering the reaction energy barriers and overall polarization along the four-electron pathway. These findings highlight the synergistic effect of Pd nanocatalysts and conductive porous Cu foam framework in promoting efficient and reversible CO2/Li2CO3 conversion.
科研通智能强力驱动
Strongly Powered by AbleSci AI