阴极
材料科学
电解质
涂层
电压
电化学
化学工程
自行车
电阻抗
相间
原子层沉积
钛
图层(电子)
电极
光电子学
电流密度
介电谱
沉积(地质)
保形涂层
高压
电弧
储能
复合材料
化学计量学
能量密度
纳米技术
分析化学(期刊)
理论(学习稳定性)
作者
Swapnil Barthwal,Sri Harsha Akella,Ankush Kumar Singh,Akanksha Joshi,Nicole Leifer,Malachi Noked
标识
DOI:10.1021/acsaem.6c01888
摘要
Abstract Li(MnxFe1–x)PO4 (LMFP) is a Co/Ni free, 4 V class cathode material for cost-sensitive electric vehicles and grid-scale energy storage. However, fully accessing its capacity and energy density requires ≥4.5 V operation, which accelerates electrolyte oxidation and Mn/Fe dissolution, driving impedance growth, voltage fade, and capacity loss. In this work, LMFP powder is rationally engineered with a conformal ZnF2 coating via atomic layer deposition (ALD), and its electrochemistry is comprehensively investigated. Under demanding cycling conditions (1000 cycles, 2.5–4.5 V vs Li/Li+; discharge @1C and 5C), the LMFP@ZnF2 cathode demonstrates >22% higher capacity retention than its pristine counterpart. Postmortem analyses reveal that ZnF2 encapsulation facilitates the formation of a thin, uniform, and F-, Li-, and P-enriched cathode–electrolyte interphase (CEI) that preserves the Mn/Fe stoichiometry and mitigates particle pulverization. Compared to the organic-rich CEI in the pristine-LMFP cathode, the robust inorganic-dominated CEI in LMFP@ZnF2 was found to be instrumental in promoting high-voltage stability and mechanical integrity of the cathode. Overall, this research presents a scientifically grounded and industry-relevant strategy for stabilizing LMFP-cathode operation at high voltages and aligns with global sustainability goals.
科研通智能强力驱动
Strongly Powered by AbleSci AI