材料科学
腐蚀
生物材料
扫描电子显微镜
X射线光电子能谱
图层(电子)
冶金
硫酸盐还原菌
硫黄
透射电子显微镜
接触角
核化学
复合材料
化学工程
硫酸盐
纳米技术
化学
工程类
作者
Joanna Mystkowska,Jose A. G. Ferreira,Katarzyna Leszczyńska,Sylwia Joanna Chmielewska,J. R. Dąbrowski,Piotr Wieciński,Krzysztof Jan Kurzydłowski
摘要
Corrosion processes of metallic biomaterials in the oral cavity pose a significant limitation to the life and reliable functioning of dental materials. In this article, the influence of environment bacteria Desulfotomaculum nigrificans sulfate reducing bacteria on the corrosion processes of 316LV steel was assessed. After 14 and 28 days of contact of the material with the bacterial environment, the surfaces of the tested biomaterial were observed by means of confocal scanning laser microscopy, and their chemical composition was studied using X‐Ray Photoelectron Spectrometry and a scanning transmission electron microscopy. Corrosive changes, the presence of sulfur (with atomic concentration of 0.5%) on the surface of the biomaterial and the presence of a thin oxide layer (thickness of ∼20 nm) under the surface of the steel were observed. This corrosion layer with significant size reduction of grains was characterized by an increased amount of oxygen (18% mas., p < 0.001) in comparison to untreated 316LV steel (where oxygen concentration − 10% mas.). Image analysis conducted using APHELION software indicated that corrosion pits took up ∼2.8% of the total tested surface. The greatest number of corrosion pits had a surface area within the range of 100–200 μm2. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 222–229, 2017.
科研通智能强力驱动
Strongly Powered by AbleSci AI