Experimental Study on the Pressure Distribution Mechanism Among Stages of the Magnetic Fluid Seal

One of the main engineering applications of ferrofluids is in magnetic fluid seals, working in rotary motion. An area, which has so far been insufficiently examined, is the mechanism of leaks between seal stages in this type of seal. This is an important issue in order to understand the principle of the seal operation and to properly design this type of seal. This paper presents the results of research into the mechanism of leaks between stages in multi-stage magnetic fluid seals. The tests were conducted when the pressure of the sealing air increased and reached its maximum value. The influence of the magnetic fluid properties, such as saturation magnetization or dynamic viscosity, was taken into account. Studies were performed for different seal temperatures. Experiments allowed models for determining the maximum pressure of the multi-stage seal to be proposed, based on the information about this pressure for a one-stage seal. This paper presents the comparative results of the critical pressure value obtained from experimental studies and calculations based on numerical simulations.