氧化镍
材料科学
钙钛矿(结构)
表面光电压
X射线光电子能谱
紫外光电子能谱
能量转换效率
纳米晶
化学工程
镍
氧化物
制作
光伏系统
纳米技术
紫外线
光电子学
带隙
表面改性
光谱学
冶金
病理
工程类
替代医学
物理
生物
医学
量子力学
生态学
作者
Juan Tirado,Manuel Vásquez-Montoya,Cristina Roldán-Carmona,Maryline Ralaiarisoa,Norbert Koch,Mohammad Khaja Nazeeruddin,Franklin Jaramillo
标识
DOI:10.1021/acsaem.9b00603
摘要
Development of low-cost solution processable inorganic hole-transporting materials (HTM) in n–i–p perovskite solar cells (PSCs) is still a challenge toward stable and cost-effective devices. Here, we report the synthesis, surface functionalization, and application of hydrophobic nickel oxide nanocrystals (ho-NiOx) as HTM in planar n–i–p PSCs. The morphological and electrical properties of ho-NiOx layers were evaluated by atomic force microscopy (AFM) and conductivity measurements as well as ultraviolet photoelectron spectroscopy (UPS) and surface photovoltage (SPV) measurements. Compared to the state-of-the-art Spiro-OMeTAD, our results suggested a better energy band alignment between ho-NiOx and (FAPbI3)0.78(MAPbBr3)0.14(CsPbI3)0.08 perovskite. Noticeably, ho-NiOx-based devices exhibit a power conversion efficiency (PCE) of 12.71% and a stabilized power output (SPO) of 10.99%, the best performance reported so far employing NiOx as the sole top transport layer. Notably, a low photovoltage suggests that the Voc could be enhanced by reducing possible recombination paths at the perovskite/HTM interface. Moreover, unencapsulated PSC employing ho-NiOx exhibited an outstanding stability under high moisture levels (∼65% RH) retaining ∼90% of initial PCE after 1008 h of fabrication, paving the way toward scalable and solution processed fully inorganic blocking layer PSCs.
科研通智能强力驱动
Strongly Powered by AbleSci AI