PRODUCTION OF BIOPLASTIC FROM POTATO STARCH

Due to their diverse properties, plastic materials are used in numerous sectors. It is possible to produce different articles and plastic objects with reduced costs, being more accessible to the population. Conventional plastics are obtained from petroleum-derived raw materials, a non-renewable resource in which their extraction and refining process cause major environmental impacts. The production of plastic reaches a level of approximately one hundred and forty million tons per year, and the disposal of these materials is increasing, generating a high rate of waste and leading to an increase of pollution since the decomposition of these materials lasts about five hundred years old. Conventional plastics can be replaced by bioplastics, a material obtained from renewable raw materials such as potatoes, cassava, maize, and which, when disposed of under favorable conditions, decomposes faster, as during its degradation process at least one step occurs. Through the metabolism of organisms present in the environment. Starch has been widely used in the production of biodegradable packaging, so the objective of this work was to produce a biodegradable bioplastic from the potato starch. Potato starch, glycerin, hydrogen peroxide, distilled water, and commercial agar were used to produce the bioplastic. Bench-scale bioplastics had good organoleptic characteristics, similar in appearance to a conventional plastic obtained from petroleum. The thickness, moisture content, and solubility of the bioplastics were analyzed, as well as their fruit preservation capacity. The samples produced were rigid and with good resistance.