On the luminance saturation of phosphor-in-glass (PiG) films for blue-laser-driven white lighting: Effects of the phosphor content and the film thickness

To investigate the luminance saturation in high-power blue-laser-driven solid state lighting, the Y3Al5O12: Ce (YAG)-based PiG films was co-fired with a high thermally conductive sapphire substrate. When the PtG ratio or the thickness of the PiG film increases, the luminance saturation becomes worse and both of the luminous flux and luminous efficacy decrease. With an additional sapphire substrate coated with an anti-reflection layer on one side and a blue-pass filter on another side attached to the PiG film, the film shows an improvement in luminous flux and efficacy, and produces the white light with a luminous flux of 1709 lm, a luminous efficacy of 211 lm W−1 and a correlated color temperature of 6602 K under the maximum (10.3 W mm−2) blue laser light excitation. It indicates that the PiG film could be applied in high power laser-driven solid state lighting when its microstructure is carefully tailored.