喷气燃料
燃烧
柴油
喷射(流体)
航空航天工程
表征(材料科学)
材料科学
汽车工程
核工程
环境科学
化学
工程类
纳米技术
有机化学
作者
Christian Schulz,Tamara Ottenwälder,Thomas Raffius,Gerd Grünefeld,Hans‐Jürgen Koß,Stefan Pischinger
摘要
Due to experimental challenges, combustion of diesel-like jets has rarely been characterized by laser-based quantitative multiscalar measurements. In this work, recently developed laser diagnostics for combustion temperature and the concentrations of CO, O2, and NO are applied to a diesel-like jet, using a highly oxygenated fuel. The diagnostic is based on spontaneous Raman scattering (SRS) and laser-induced fluorescence (LIF) methods. Line imaging yields multiscalar profiles across the jet cross section. Measurements turn out to be particularly accurate, because near-stoichiometric combustion occurs in the central region of the jet. Thereby, experimental cross-influences by light attenuation and interfering emissions are greatly reduced compared to the combustion of conventional, sooting diesel fuel jets. This is achieved by fuel oxygenation and enhanced premixing. The second stage of ignition occurs relatively close to the end of fuel injection, so that the flame is similar to partially premixed, low-load, single-injection, low-temperature combustion (LTC) in heavy-duty engines. Since exhaust-gas recirculation (EGR) is not applied in this work, relatively high NO concentrations (~500 ppm) are found in the downstream jet. The origin of enhanced NO formation is investigated in more detail by the other measured scalars. The local equivalence ratio is estimated based on both the O2 and CO profiles. Temperature measurements yield further information for the interpretation of NO signals. Rapid leaning caused by the end of injection is indicated by the CO and O2 data, but the corresponding effect on temperature and NO appears to be weak.
科研通智能强力驱动
Strongly Powered by AbleSci AI