振动
还原(数学)
超材料
声学
结构工程
有限元法
材料科学
联轴节(管道)
振动控制
传输(电信)
锤子
拓扑(电路)
宽带
动力减振器
正常模式
调谐质量阻尼器
网格
工程类
计算机科学
能量(信号处理)
随机振动
主动振动控制
作者
Yong-Le Fan,Cong Wang,Jin-Shui Yang,Fang Yang,Hang Ren,Jun-Teng Zhou
标识
DOI:10.1142/s0219455428500356
摘要
To address the insufficient low-frequency vibration reduction capability of high-speed train floor structures, a chiral metamaterial structure was proposed and fabricated as a substitute for wooden supports. The structure consists of an aluminum chiral load-bearing frame and an array of steel–rubber composite resonators. By reconfiguring vibration transmission paths through chiral topology and regulating energy transfer via local resonance, the proposed design aims to improve the dynamic behavior of the supporting path. Finite element simulations and shaker-table tests were conducted to compare the vibration transmission characteristics of chiral and grid structures, with and without resonators, and the vibration reduction performance was evaluated using vibration level differences. In addition, impact hammer tests were performed to investigate the dynamic response of a local floor system after replacing the wooden supports. The results show that the chiral topology enhances vibration energy redistribution and local coupling within the structure, while the introduction of resonators further broadens and strengthens the vibration reduction effect. Compared with the conventional wooden-support scheme, the proposed chiral metamaterial structure reduced the overall vibration response of the local floor by an average of 2.61[Formula: see text]dB, with a maximum reduction of 11.94[Formula: see text]dB. The proposed structure shows potential for low-frequency and broadband vibration reduction in high-speed train floor applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI