材料科学
原材料
抗弯强度
碳纳米管
增韧
碳纤维
复合材料
赤泥
热解
抗压强度
复合数
产量(工程)
塑料废料
成核
城市固体废物
纳米复合材料
催化作用
水泥
废物管理
作者
Mingyue Yan,Huiyang Bi,Yifan Lu,Zhichun Huang,Chen Sun,Zhongjian Li,Yang Hou,Lecheng Lei,Bin Yang
标识
DOI:10.1038/s41467-026-79066-8
摘要
Plastic waste accumulation and cement industry decarbonization demand cross-sectoral solutions, with disposal-challenged red mud (RM) offering an opportunity. We couple plastic pyrolysis with RM catalysis to co-produce H2 and binder-compatible carbon nanotubes (CNTs)/RM composites, which serve as nano-toughening additives in alkali-activated materials (AAMs). We explore effects of RM-to-plastic ratio, feedstock and RM type on H2 production, CNT yield and structure. At an optimal RM-to-PE ratio of 1:4, 21.0 mmol/gplastic H2 and 262 mg/gplastic CNTs are obtained. At 1 wt% CNT dosage, CNTs/RM composite enhances AAM compressive and flexural strengths by 33.1% and 54.3%, respectively, increasing the flexural-to-compressive strength ratio by 16.4%. This improvement arises from fiber-bridging, pore-filling and nucleation effects of CNTs, and depends on CNT structural parameters. Here, we show that this scalable route converts wastes into low-carbon, cost-effective toughening additives, reducing carbon emissions, energy demand, and cost by 65.8%, 71.1%, and 13.6%, respectively, compared with conventional CNTs production. This study converts red mud and plastic waste into nanocarbon composites that strengthen and toughen alkali-activated materials, offering a route to upcycle two major waste streams into low carbon construction materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI