材料科学
极限抗拉强度
层错能
成核
微观结构
退火(玻璃)
打滑(空气动力学)
奥氏体
冶金
延伸率
复合材料
位错
叠加断层
变形(气象学)
奥氏体不锈钢
粒度
材料的强化机理
拉伸试验
堆积
应变硬化指数
可塑性
吕德斯乐队
变形机理
沉淀硬化
产量(工程)
作者
Tingting Yu,Lijun Zhou,Ke Zhang,Yanguang CAO,Mingya Zhang,ZhaoDong Li,Jinghui Li
摘要
Fe–Mn–Al–C lightweight steels are promising candidates for weight‐sensitive structural components. However, the role of compositional tailoring in governing strength–ductility synergy remains to be fully clarified. In this study, Fe–Mn–Al–C steels with varying Si contents were designed and subjected to solution treatment to systematically investigate the effects of Si on microstructural evolution and tensile deformation behavior. As the Si content increased from 0.2 to 1.5 wt.%, all tested steels retained a single‐phase austenitic structure. The effective grain size increased from 40.5 to 62.4 μm, the fraction of annealing twins rose from 47.9% to 52.5%, and lattice distortion became more pronounced, while stacking fault energy decreased from 44.1 to 41.3 mJ/m 2 . The reduced stacking fault energy promotes the nucleation and sustained multiplication of deformation twins during tensile deformation, strengthens the interaction between dislocation slip and mechanical twinning, and maintains high work‐hardening capability. Si‐induced solid‐solution strengthening, together with TWIP‐assisted dynamic subdivision of austenite grains, suppresses strain localization and enables simultaneous improvement in strength and ductility. Within the investigated composition range, the 1.5Si steel exhibits the optimal strength–ductility combination, with a yield strength of 378 MPa, an ultimate tensile strength of 761 MPa, and an elongation to fracture of 49.1%.
科研通智能强力驱动
Strongly Powered by AbleSci AI