Accelerated Computational Fluid Dynamics (CFD)-Based Quantitative Prediction of Urea Deposition in Selective Catalytic Reduction (SCR) Systems

选择性催化还原 尿素 还原(数学) 化学 沉积(地质) 催化作用 蒸发 计算流体力学 化学工程 氨 分解 传质 过程(计算) 材料科学 热力学 流量(数学) 动力学 工艺工程 传热 机械 化学动力学 电流(流体) 多相流 环境科学 流体力学 边值问题 氮气 计算机模拟 体积流量 惰性
作者
Sumant R. Morab,Suraj Khalate,Shoaib Ansari,Pengze Yang
出处
期刊:SAE technical paper series [SAE International]
卷期号:1
标识
DOI:10.4271/2026-01-5041
摘要

Mitigation of harmful emissions from oil-based engines is essential to avoid environmental pollution and comply with various NOx regulations across the globe. This can be partially achieved by injecting urea to produce ammonia (NH3), which reacts with NOx in a catalyst to produce harmless nitrogen (N2) and water vapor (H2O). However, urea deposition in a selective catalytic reduction (SCR) system poses a significant threat to the NOx removal process by not only reducing the urea conversion rate but also blocking the incoming flow and causing an additional pressure drop. Numerical modeling of this urea deposit formation involves multiphase flow physics coupled with accurate heat transfer calculations. Additionally, since urea decomposes into various by-products like biuret, cyanuric acid (CYA), and ammelide, detailed chemical kinetics modeling is equally important. Accurate and fast computational fluid dynamics (CFD) simulations can help accelerate SCR system design cycles, leading to a reduction in experimental cost. In this study, we employ CONVERGE CFD to model the whole process from urea–water solution (UWS) injection to droplet evaporation and decomposition (using 12-step detailed-chemistry), film formation, and final deposition as a solid. A new spray-wall interaction model is introduced based on published experimental observations. The efficacy of the numerical model is demonstrated using an S-bend tube, where the UWS is injected just at the end of the S-bend. The predicted deposit mass and patterns are compared with the experiments, and good agreement is observed for three different operating conditions. A novel boundary morphing feature is activated to model the deformation of the tube walls because of urea deposition. Finally, to accelerate the simulations, a spray database approach is introduced. Coupled with the fixed-flow feature, this results in around 58% reduction in computational time without compromising accuracy. The present work thus provides a numerical framework to accurately capture urea deposition with a fast turnaround time.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
1秒前
盛乾亮完成签到,获得积分10
1秒前
1秒前
清风携来春夏完成签到,获得积分10
2秒前
chen发布了新的文献求助10
2秒前
3秒前
情怀的应助被牧百川采纳,获得10
4秒前
zhiren发布了新的文献求助10
5秒前
科研通AI6.4的应助被tlc_191026采纳,获得50
6秒前
痕恨空完成签到,获得积分10
6秒前
7秒前
cbk12345发布了新的文献求助10
7秒前
7秒前
7秒前
Dreamer完成签到,获得积分10
7秒前
8秒前
8秒前
9秒前
初景发布了新的文献求助200
9秒前
10秒前
10秒前
我是老大的应助被马世杰采纳,获得10
11秒前
11秒前
无语的荠完成签到,获得积分10
12秒前
huoyan2006发布了新的文献求助10
12秒前
又又完成签到,获得积分20
12秒前
科研小白发布了新的文献求助10
12秒前
SunAuole完成签到,获得积分10
12秒前
桐桐的应助被科研通管家采纳,获得10
13秒前
小米渣完成签到,获得积分10
13秒前
null的应助被科研通管家采纳,获得10
13秒前
今后的应助被科研通管家采纳,获得10
13秒前
orixero的应助被科研通管家采纳,获得10
13秒前
ZZSY发布了新的文献求助10
13秒前
sanvva的应助被科研通管家采纳,获得30
14秒前
斯文败类的应助被科研通管家采纳,获得10
14秒前
Diels发布了新的文献求助10
14秒前
Ada1992完成签到,获得积分10
14秒前
大模型的应助被科研通管家采纳,获得10
14秒前
领导范儿的应助被科研通管家采纳,获得10
14秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
Improving the wear resistance of vehicle gear oil by oil soluble LaF3 nanoparticles and typical additives of gear oil 500
Boundaries and Bodhisattvas 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8183449
求助须知:如何正确求助?哪些是违规求助? 9572834
关于积分的说明 21827509
捐赠科研通 7780646
什么是DOI,文献DOI怎么找? 3434016
关于科研通互助平台的介绍 2558189
邀请新用户注册赠送积分活动 2480371