电解质
离子电导率
法拉第效率
材料科学
化学工程
离子键合
锂(药物)
聚合物
聚合物电解质
相容性(地球化学)
金属
磁滞
电导率
复合数
金属锂
无机化学
化学稳定性
快离子导体
燃料电池
离子液体
电化学窗口
作者
J F Chen,Kaizhen Li,Ruohan Hou,Shijie Zhang,Guosheng Shao,Peng Zhang
标识
DOI:10.1016/j.apmate.2026.100445
摘要
The practical application of lithium metal batteries is constrained by low coulombic efficiency and safety risks arising from Li dendrite growth. Developing functional gel polymer electrolytes (GPEs) systems is recognized as promising approach to address these challenges. In this work, a novel GPE (HFP/PEO-EMIM) was obtained by functionalizing the PVDF-HFP/PEO composite with EMIMTFSI ionic liquid. The resulting HFP/PEO-EMIM exhibits strong chemical stability and excellent heat resistance. The introduction of EMIMTFSI improves the interfacial compatibility between HFP/PEO-EMIM and the Li anode. More importantly, experiments and theoretical calculations show that EMIM + cations preferentially interact with polymer molecules, ensuring high Li flux and accelerating its transport. Therefore, HFP/PEO-EMIM exhibits a high ionic conductivity of 1.82 mS cm −1 . Additionally, the enriched TFSI − promotes the formation of a stable inorganic-rich SEI, enabling uniform Li deposition. As expected, the Li||HFP/PEO-EMIM||Li symmetric cell maintains low voltage hysteresis after stable cycling for 3600 h, and the optimized LiFePO 4 ||Li full cell retains 95% of its initial capacity after 650 cycles at 1 C, remaining stable for over 500 cycles at 3 C. Furthermore, extended cycle life was also observed in LiCoO 2 cells and LiFePO 4 pouch cells, underscoring the broad practical potential of the proposed electrolyte system.
科研通智能强力驱动
Strongly Powered by AbleSci AI