介质阻挡放电
降级(电信)
亚甲蓝
等离子体
分析化学(期刊)
化学
非热等离子体
电介质
半径
材料科学
化学工程
色谱法
光电子学
电子工程
有机化学
工程类
催化作用
物理
计算机科学
光催化
计算机安全
量子力学
作者
Xiaoli Zhang,Penghui Shi,Wenbin Zhao,Wu Lu,Feng Li,Yulin Min,Qunjie Xu
标识
DOI:10.1016/j.seppur.2022.120476
摘要
Advanced oxidation processes (AOPs) focusing on non-thermal plasma induced by dielectric barrier discharge (DBD) are adequate sources of diverse reactive oxygen species beneficial for water and wastewater treatment. The degradation of methylene blue (MB) was investigated using plasma liquid dielectric barrier discharge with a multineedle-to-plane reactor. MB at 20 mg/L concentration was almost completely degraded after 40 min of treatment. In this study, several important parameters, such as input voltage, initial concentration, initial pH, discharge gap, tip radius of curvature, and presence of radical, were evaluated, and their effects on MB degradation rate were investigated. The degradation rate of MB increased with initial pH. By contrast, the degradation rate showed a downward trend with increasing initial concentration, discharge distance, and tip curvature radius. O3 and H2O2 produced during the degradation process considerably influenced the entire degradation process, especially when the quenching agents of HO⋅, O2·- and e− were added, and the degradation efficiency was obviously reduced. According to the measured spectrum, the possible process of the discharge process was analyzed, and the COMSOL finite element simulation is performed to obtain the visualization of the discharge model. This work can provide exploratory platforms for comprehensively understanding and enhancing MB degradation in DBD plasma technology.
科研通智能强力驱动
Strongly Powered by AbleSci AI