材料科学
复合材料
涂层
陶瓷
图层(电子)
热解炭
碳化硅
复合数
基质(水族馆)
氧化物
胶结(地质)
抗弯强度
热解
冶金
化学工程
海洋学
地质学
工程类
水泥
作者
Tao Li,Yulei Zhang,Jiachen Li,Junshuai Lv,Shuai Kang
标识
DOI:10.1016/j.corsci.2022.110419
摘要
To obtain silicon-based ceramic coated C/C composites with excellent mechanical and antioxidative properties, a SiC/SiC-MoSi2-ZrB2 composite ceramic coating was designed and prepared on the surface of C/C composites by a three-step process. Firstly, a pyrolytic carbon (PyC) layer was deposited on the C/C substrate to fill its holes and cracks. Secondly, a SiC porous layer was fabricated on the PyC layer to create many holes subsequently used to distribute massive MoSi2-ZrB2 ceramics. Finally, a double-layer SiC/SiC-MoSi2-ZrB2 composite ceramic coating was formed on C/C composites after a pack cementation (PC) process, which consisted of a dense SiC inner coating (a thickness of ~ 80 µm) and a uniform and rich MoSi2-ZrB2 outer coating (~ 200 µm). The bending strength of the SiC/SiC-MoSi2-ZrB2 coated C/C sample was 21.5 % higher than that of the raw C/C sample. Moreover, the SiC/SiC-MoSi2-ZrB2 coating provided good oxidation protection for C/C composites at high temperature, and its mass loss was only 0.56 % after oxidation for 305 h at 1773 K in air due to the blocking effect of the compound oxide glass (SiO2, ZrO2 and ZrSiO4) layer on oxygen diffusion into the internal coating and C/C substrate. Therefore, this novel strategy for coating preparation can obtain SiC/SiC-MoSi2-ZrB2 coated C/C composites with excellent mechanical and oxidation resistance properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI