热离子发射
材料科学
光电子学
硅
石墨烯
基质(水族馆)
氧化物
场电子发射
二极管
电极
氧化硅
电流密度
电子
纳米技术
氮化硅
化学
物理
地质学
物理化学
冶金
海洋学
量子力学
作者
Gongtao Wu,Zhiwei Li,Zhiqiang Tang,Dapeng Wei,Gengmin Zhang,Qing Chen,Lian‐Mao Peng,Xianlong Wei
标识
DOI:10.1002/aelm.201800136
摘要
Abstract Electrically driven on‐chip electron sources that do not need to be heated are long pursued, but their realization remains challenging. Here, it is shown that a nanogap formed by two electrodes on a silicon oxide substrate functions as an electron‐emitting nanodiode after the silicon oxide in the nanogap is electrically switched to a high‐resistance conducting state. A nanodiode based on graphene electrodes can be turned on by a voltage of ≈7 V in ≈100 ns and show an emission current of up to several microamperes, corresponding to an emission density of ≈106 A cm−2 and emission efficiency as high as 16.6%. We attribute the electron emission to be generated from a metal–insulator–metal tunneling diode on the substrate surface formed by the rupture of conducting filaments in silicon oxide. An array of 100 nanodiodes exhibits a global emission density of 5 A cm−2 and stable emission with negligible current degradation over tens of hours under modest vacuum. The combined advantages of a low operating voltage, fast temporal response, high emission density and efficiency, convenient fabrication and integration, and stable emission in modest vacuum make silicon oxide electron‐emitting nanodiodes a promising on‐chip electron sources.
科研通智能强力驱动
Strongly Powered by AbleSci AI