Fabrication of 60μm-Thick Free-Standing Bilayer Solid Electrolytes for Solid-State Batteries Using Solution Processing and Lamination

材料科学 双层 流延 阴极 阳极 电解质 离子电导率 复合材料 化学工程 泥浆 电极 膜 化学 生物化学 工程类 物理化学
作者
Young-Gyu Kim,Carlos Juarez Yescaz,Daniel W. Liao,Manoj K. Jangid,Prerna Joshi,Heng Yang,Beniamin Zahiri,Paul V. Braun,Neil P. Dasgupta
出处
期刊:Meeting abstracts [Institute of Physics]
卷期号:MA2024-01 (4): 677-677
标识
DOI:10.1149/ma2024-014677mtgabs
摘要

Development of solid-state batteries with a high voltage cathode and lithium metal anode could enable high energy density while avoiding safety issues of flammable liquid electrolytes. However, the solid electrolyte (SE) should meet multiple requirements, including 1) electrochemical stability at both the cathode and anode side interfaces, 2) small thickness (tens of μm) to maximize energy density of the cell, and 3) fabrication with a scalable manufacturing method. Using bilayer SEs with different electrochemical stability windows could enable stability at both cathode|SE and anode|SE interfaces. In this work, we developed a manufacturing process to fabricate thin (60 μm) free-standing bilayer SE films from slurry casting and lamination, which can be used for large scale manufacturing of SSBs. Halide SE (Li 3 InCl 6 ) and sulfide SE (Li 6 PS 5 Cl) were slurry casted on different substrates, and then were dried in vacuum before being laminated onto each other to make a free-standing bilayer film. The parallel slurry casting approach eliminates cross-compatibility requirements of the solvents used for slurry preparation. The resulting bilayer films after densification were pin-hole free without intermixing between the two phases. The ionic conductivity of the bilayer SE film was ~70% of the bilayer SE pellet (1 mm thickness in total) made with a conventional powder pressing method. However, because the thickness of bilayer SE film (60 μm) was much smaller than the bilayer SE pellet (1 mm), the bilayer SE film had ~10x lower area-specific resistance (ASR) compared to the bilayer SE pellet. Because of the lower total cell resistance, the cell made with the bilayer SE film had a better rate capability compared to the reference cell in pellet geometry. The strategy developed in this work could be integrated into current manufacturing infrastructure of battery fabrication as it is based on slurry casting, which is already a well-established fabrication method for lithium-ion batteries. Moreover, it could be used to fabricate multi-layered solid-state architectures in general, which are challenging to manufacture due to solvent compatibility issues during slurry casting. The study will assist the progress of solid-state battery manufacturing by providing a scalable manufacture method to prepare thin free-standing bilayer SEs.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
1秒前
1秒前
华仔的应助被Ziezer采纳,获得10
1秒前
Crssss的应助被学术laji采纳,获得10
1秒前
1秒前
1秒前
小马甲的应助被清岫采纳,获得10
1秒前
肉肉香香发布了新的文献求助10
1秒前
陈帅完成签到,获得积分10
2秒前
情怀的应助被dgb采纳,获得10
2秒前
2秒前
无花果的应助被酷酷柚子采纳,获得10
2秒前
Jasper的应助被成就的怀蕾采纳,获得10
2秒前
2秒前
黄色大香蕉完成签到 ,获得积分10
2秒前
2秒前
3秒前
3秒前
真实的豆芽完成签到,获得积分10
4秒前
美年达发布了新的文献求助10
4秒前
geshuangjie完成签到,获得积分10
5秒前
华无剑的应助被微笑的外绣采纳,获得10
5秒前
好好好发布了新的文献求助10
5秒前
5秒前
苗苗完成签到,获得积分20
5秒前
diedeline发布了新的文献求助10
6秒前
香蕉觅云的应助被小太阳采纳,获得10
6秒前
jy发布了新的文献求助10
7秒前
hhh完成签到,获得积分20
7秒前
泥猴桃完成签到,获得积分10
7秒前
贪恋朝夕y发布了新的文献求助10
7秒前
7秒前
许可991127发布了新的文献求助10
7秒前
三岁啊吉吉完成签到,获得积分10
8秒前
杨媛发布了新的文献求助10
8秒前
能干如娆完成签到,获得积分10
8秒前
8秒前
hong发布了新的文献求助10
8秒前
十二月完成签到,获得积分10
9秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
Grapes 1000
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8178280
求助须知:如何正确求助?哪些是违规求助? 9569046
关于积分的说明 21802436
捐赠科研通 7773138
什么是DOI,文献DOI怎么找? 3432735
关于科研通互助平台的介绍 2556770
邀请新用户注册赠送积分活动 2478274