材料科学
电解质
离子电导率
锡
化学工程
电化学窗口
电化学
锂(药物)
聚合物
环氧乙烷
阴极
堆积
复合数
离子键合
离子
复合材料
电极
有机化学
冶金
物理化学
化学
内分泌学
共聚物
工程类
医学
作者
Long Hu,Xue Wen Gao,Ziyong Li,Yuxuan Liu,Hui Wang,Jun Liu,Renzong Hu
标识
DOI:10.1021/acsami.3c07794
摘要
To improve the ionic conductivity and cycling stability of solid-state lithium batteries based on poly(ethylene oxide) (PEO) electrolytes, we developed a sandwich-structured composite polymer electrolyte (sandwich-CPE) PEO-TiN/PEO-LiYF 4 /PEO-TiN. The sandwich-CPE delivers a high ionic conductivity of 1.7 × 10 –4 S cm –1 at 30 °C and a wide potential window of 0 to 5.0 V (vs Li/Li + ). Adding PEO-TiN leads to the formation of Li 3 N between Li and sandwich-CPE during cycling, which effectively reduces the level of Li dendrite formation. Additionally, PEO-TiN acts as a sacrificial layer to stop the entry of Li dendrites into the interlayer PEO-LiYF 4 . Using the sandwich-CPE, LiFePO 4 retains a reversible capacity of 113.8 mA h g –1 at 30 °C after 300 cycles under 0.5 C. For high-voltage cells, LiNi 0.5 Co 0.2 Mn 0.3 O 2 retains a capacity retention of 71.4% at 45 °C after 300 cycles under 0.2 C among 3.0–4.3 V, while Li 3 V 2 (PO 4 ) 3 delivers an initial discharge capacity of 108.1 mA h g –1 at 60 °C and retains 81.6% after 500 cycles under 1 C among 2.8–4.4 V. These results demonstrate the strong electrochemical compatibility of the sandwich-CPE, enabling high reversible capacity and good cycling stability for solid-state Li batteries with different cathodes at different temperatures and current rates.
科研通智能强力驱动
Strongly Powered by AbleSci AI