过电位
析氧
材料科学
化学工程
塔菲尔方程
三元运算
催化作用
电化学
阴极
电池(电)
空位缺陷
氧气
可持续能源
原材料
分解水
纳米晶
粒度
纳米技术
球磨机
晶界
陶瓷
燃料电池
作者
Xinqing Liu,Junjie Ni,Jie Yin,Yuxuan Shao,Shuai Guo,Liqun Li,Yulai Song
出处
期刊:Energy & Fuels
[American Chemical Society]
日期:2025-09-09
卷期号:39 (37): 18043-18052
被引量:2
标识
DOI:10.1021/acs.energyfuels.5c02782
摘要
In response to the issue of time-consuming reutilization of LiNi 1– x–y Co x Mn y O 2 (NCM) cathode material in waste lithium-ion batteries and to exploit the intrinsically high catalytic activity of Ni, Co, and Mn toward oxygen evolution reaction (OER), we have employed a defect engineering method to directly convert the waste NCM into an efficient OER catalyst. This strategy is achieved through ball milling, during which the oxygen vacancy defects are introduced into NCM powder, and its particle/grain sizes decrease with milling time within 35 h. The introduction of oxygen vacancy defects can increase the number of active sites, modulate the electronic structure, and enhance the conductivity of the NCM sample. The grain refinement increases its electrochemical active area, exposing greater quantities of active sites for the OER catalysis. Such positive impacts are responsible for the excellent OER performance of NCM powder ball-milled after 5 h, which exhibit an overpotential of 362.0 mV at 10 mA cm –2 and a Tafel slope of 87.4 mV dec –1 in a 1.0 M KOH electrolyte, along with good durability. This research offers a novel method of turning waste lithium-ion batteries into treasure for the preparation of economically viable and high-performance catalysts, promoting sustainable energy production based on effective resource recovery.
科研通智能强力驱动
Strongly Powered by AbleSci AI