Design and performance study of gas–liquid separation–mixing device for electric submersible pump in high-gas-content oil wells

In the process of oil production, wells containing gas can impact the efficiency of electric submersible pump (ESP), potentially causing gas lock. This issue can lead to the loss of lifting capacity in ESP, affecting the normal production of oil wells. To address this problem, the concept of gas separation before mixing transportation has been proposed, and a gas–liquid separation–mixing device has been designed. Experimental tests on the gas–liquid two-phase flow under various working conditions were conducted. A numerical model of the physical process was developed and validated with the experimental results. The results indicate that when the inlet flow rate exceeds 8.75 m3/h, the gas phase can be effectively accumulated in the center of the main pipeline after flowing through the guide vanes, thereby achieving efficient gas–liquid separation. Centrifugal number, which is defined as the ratio of axial flux of centrifugal force to axial flux of gravity, was proposed for evaluating the flow characteristics. When the centrifugal number exceeds 6.5, a high-quality gas core is formed in the pipe. At high inlet gas content, the volume fraction of gas in the main pipe initially decreases to 2% as the flow rate increases to 15 m3/h. However, at a flow rate of 30 m3/h, the volume fraction gradually rises to 30%, which results in a significant amount of gas being forced into the main pipe. The results are beneficial for expanding the use of ESP and improving the lifting efficiency in the development of oil field with high gas content.