A closer look at the magnetic, photo-electrochemical, and optical properties of rare earth (Sm, Dy, Ho, Er, and Yb)-doped manganese ferrite for potential use as a photocatalyst

For photocatalysis technology to be applied industrially, there has been a significant increase in the need for visible-light-driven photocatalysts that possess exceptional superparamagnetic characteristics to facilitate easy separation. Hence, in this study, rare earth elements (RE) (Sm, Yb, Dy, Er, and Ho) were systematically doped into manganese ferrite (MF) using the coprecipitation method to serve two purposes, namely, reducing the photogenerated electron-hole recombination during photocatalysis and modifying the magnetic properties of MF to become superparamagnetic. The synthesised Re-doped MF was found to be visible light active, as evidenced by the transient photocurrent response and the obtained band gaps, which were in the range of 1.84 – 1.93 eV. From the cyclic voltammetry, electrochemical impedance spectroscopy, and Tafel polarization plots, it was evident that different RE element dopants have different effects on improving the electrochemical properties of MF. Overall, fast electron transfer of the synthesised materials was found to decrease in the following order: Sm-MF > Dy-MF > Ho-MF > MF > Er-MF > Yb-MF. The g-factor and peak-to-peak line width were found to be in the range of (2.221 – 2.317) and (93.17 – 149.85 mT), respectively. The resonance field and hysteresis loop (Hc) were found to be in the range of (289.2 – 301.86 mT) and (8.24 – 32.61 mT), respectively. Overall, the synthesised RE-doped MF exhibits ferromagnetic properties, and the obtained small Hc values hint at these particles exhibiting superparamagnetic properties. In summary, doping MF with Sm, Dy, and Ho is more desirable as it alters the magnetic properties towards superparamagnetic and improves its electrochemical properties. Thus, this study is of importance in advancing the field of photocatalysis in water treatment and material science.