二氧化碳
烟气
吸附剂
化学工程
结垢
二氧化碳去除
材料科学
负二氧化碳排放
吸附
化学
固碳
有机化学
膜
生物化学
工程类
作者
John J. Vericella,Sarah E. Baker,Joshuah K. Stolaroff,Eric B. Duoss,James O. Hardin,James P. Lewicki,Elizabeth Glogowski,William C. Floyd,Carlos A. Valdez,William Smith,Joe H. Satcher,William L. Bourcier,Christopher M. Spadaccini,Jennifer A. Lewis,Roger D. Aines
摘要
Drawbacks of current carbon dioxide capture methods include corrosivity, evaporative losses and fouling. Separating the capture solvent from infrastructure and effluent gases via microencapsulation provides possible solutions to these issues. Here we report carbon capture materials that may enable low-cost and energy-efficient capture of carbon dioxide from flue gas. Polymer microcapsules composed of liquid carbonate cores and highly permeable silicone shells are produced by microfluidic assembly. This motif couples the capacity and selectivity of liquid sorbents with high surface area to facilitate rapid and controlled carbon dioxide uptake and release over repeated cycles. While mass transport across the capsule shell is slightly lower relative to neat liquid sorbents, the surface area enhancement gained via encapsulation provides an order-of-magnitude increase in carbon dioxide absorption rates for a given sorbent mass. The microcapsules are stable under typical industrial operating conditions and may be used in supported packing and fluidized beds for large-scale carbon capture. Most carbon capture technologies rely on corrosive amine solutions, or high surface area materials. Here, the authors fabricate polymer microcapsules with liquid carbonate cores and permeable silicone shells combining the capacity of liquid sorbents with the surface area and low volatility of solid materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI