钾
剥离(纤维)
碱金属
电解质
材料科学
体积热力学
阳极
锂(药物)
金属
无机化学
电极
化学工程
钠
电化学
产量(工程)
枝晶(数学)
化学
电流密度
体积分数
金属锂
摩尔浓度
容量损失
分析化学(期刊)
电池(电)
表面积体积比
作者
Thomas A. Schall,Maya Ziegler,Max Wacha,Qianli Ma,Frank Tietz,Janis Kevin Eckhardt,Chenjie Gan,Aleksandar S. Mijailovic,Brian W. Sheldon,Till Fuchs,Jürgen Janek
出处
期刊:
[American Chemical Society]
日期:2026-09-08
卷期号:2 (10): 2433-2449
被引量:1
标识
DOI:10.1021/acselectrochem.6c00237
摘要
Abstract Alkali metal solid-state batteries (Li, Na, K) suffer from contact loss at the metal|solid electrolyte interface during stripping (discharge), driven by vacancy accumulation and pore formation. This reduces contact area, increases resistance, and promotes dendrite growth during subsequent plating, eventually leading to battery failure. While lithium has been studied extensively, sodium and potassium remain comparatively underexplored despite their high abundance. Their lower yield strength, larger molar volume, and higher homologous temperature strongly affect interfacial contact evolution. Operando electrochemical dilatometry is used to determine the formed pore volume in sodium and potassium metal anodes, enabling evaluation of the vacancy injection ratio (VIR) and comparison with lithium. At low stack pressure, pores form immediately upon stripping for all three metals. The formed pore volume scales with the molar volume across lithium, sodium, and potassium. Increasing current density enhances contact loss and leads to a weaker increase in the formed pore volume in sodium and potassium, with a fraction of the formed pore volume in potassium located inside the metal bulk. In contrast, lithium shows an initial reduction in the formed pore volume (partial pore collapse), followed by a stronger increase at higher current densities. These findings reveal systematic trends among lithium, sodium, and potassium, suggesting lower yield strengths and smaller molar volumes as favorable material properties. Based on these results, a generalized mechanism for pore formation in alkali metal anodes is proposed.
科研通智能强力驱动
Strongly Powered by AbleSci AI