气凝胶
热导率
材料科学
保温
热传导
复合材料
颗粒(地质)
热的
热阻
多孔性
传热
地温梯度
管道保温
石油
热能
热桥
多孔介质
管道运输
热接触电导
电导率
作者
Xingyu Liu,Jiachao Wu,Jizhe Zhang,Peng Jun Zhao,Nyachieo Kennedy Momanyi,Zhixiong Zhou,Wen Jiang,Yong Xie,Limin Liu
标识
DOI:10.1038/s41598-025-34388-3
摘要
Silica aerogel granules possess low thermal conductivity and inherent hydrophobicity; however, the influence of granule size on thermal insulation performance has not been sufficiently investigated. In this study, silica aerogel granules with controlled sizes (0.04–3.33 mm) were prepared by mechanical or jet grinding, and a parallel thermal resistance network model was established to predict the effective thermal conductivity measured using the heat flow meter method. The results indicate that granules with an average diameter of 0.61 mm achieved the lowest thermal conductivity of 0.0173 W·m− 1·K− 1. This optimal performance originates from a balance between solid-phase conduction (reduced contact points) and gas-phase conduction (relatively compact packing density). COMSOL simulations further demonstrated that applying this material in a 2 km U-shaped geothermal well maintained the outlet fluid temperature at 99.38 °C. In addition, the intrinsically low density of the aerogel reduces the self-weight of the pipeline, thereby alleviating mechanical fatigue in long-distance transportation systems. This study provides an experimentally supported framework for understanding heat-transfer mechanisms in granular aerogel systems and offers guidance for improving the design and application of silica aerogels in geothermal and petroleum energy infrastructures.
科研通智能强力驱动
Strongly Powered by AbleSci AI