Differences in Electron and Hole Injection and Auger Recombination between Red, Green, and Blue CdSe-Based Quantum Dot Light Emitting Devices

Despite the significant progress that has been made in recent years in improving the performance of quantum dot light-emitting devices (QLEDs), the effect of charge imbalance and excess carriers on excitons in red (R) vs green (G) vs blue (B) QLEDs has not been compared or systematically studied. In this work we study the effect of changing the electron (e)/hole (h) supply ratio in the QDs emissive layer (EML) in CdSe-based R-, G-, and B-QLEDs with inverted structure in order to identify the type of excess carriers and investigate their effect on the electroluminescence performance of QLEDs of each color. Results show that in R-QLEDs, the e/h ratio in the EML is >1, whereas in G- and B-QLEDs, the e/h ratio is <1 with charge balance conditions being significantly worse in the case of B-QLEDs. Transient photoluminescence (PL) and steady state PL measurements show that, compared to electrons, holes lead to a stronger Auger quenching effect. Transient electroluminescence (TrEL) results indicate that Auger quenching leads to a gradual decline in the EL performance of the QLEDs after a few microseconds, with a stronger effect observed for positive charging versus negative charging. The results provide insights into the differences in the efficiency behavior of R-, G-, and B-QLEDs and uncover the role of excess holes and poor charge balance in the lower efficiency and EL stability of B-QLEDs.