Engineered Shape‐Morphing Transitions in Hydrogels Through Suspension Bath Printing of Temperature‐Responsive Granular Hydrogel Inks

Abstract 4D printing of hydrogels is an emerging technology used to fabricate shape‐morphing soft materials that are responsive to external stimuli for use in soft robotics and biomedical applications. Soft materials are technically challenging to process with current 4D printing methods, which limits the design and actuation potential of printed structures. Here, a simple multi‐material 4D printing technique is developed that combines dynamic temperature‐responsive granular hydrogel inks based on hyaluronic acid, whose actuation is modulated via poly(N‐isopropylacrylamide) crosslinker design, with granular suspension bath printing that provides structural support during and after the printing process. Granular hydrogels are easily extruded upon jamming due to their shear‐thinning properties and their porous structure enables rapid actuation kinetics (i.e., seconds). Granular suspension baths support responsive ink deposition into complex patterns due to shear‐yielding to fabricate multi‐material objects that can be post‐crosslinked to obtain anisotropic shape transformations. Dynamic actuation is explored by varying printing patterns and bath shapes, achieving complex shape transformations such as ‘S’‐shaped and hemisphere structures. Furthermore, stepwise actuation is programmed into multi‐material structures by using microgels with varied transition temperatures. Overall, this approach offers a simple method to fabricate programmable soft actuators with rapid kinetics and precise control over shape morphing.