材料科学
钙钛矿(结构)
钴
兴奋剂
陶瓷
阴极
氧化物
电解质
质子导体
固体氧化物燃料电池
化学工程
无机化学
复合材料
光电子学
冶金
电极
物理化学
化学
工程类
作者
Birkneh Sirak Teketel,Bayu Admasu Beshiwork,Xiaoyan Luo,Dong Tian,Shiyue Zhu,Halefom G. Desta,Quan Min Yang,Yonghong Chen,Bin Lin
标识
DOI:10.1016/j.ceramint.2022.08.301
摘要
Cobalt-free layered perovskite as a promising mixed ionic electronic conductor cathode has shown outstanding performance in conventional oxygen-ion conducting solid oxide fuel cells (O–SOFCs), but not in next-generation proton-conducting solid oxide fuel cells (H–SOFCs) due to insufficient oxygen vacancy so far. We propose a facile A-site doping strategy to enable higher-oxygen-vacancy cobalt-free layered perovskite cathode for higher-performing protonic ceramic fuel cells at reduced temperatures. As proof of concept, two different typical A-site doping of mixed-rare-earth Nd and alkali-metal K in PrBaFe 1.9 Zn 0.1 O 5+δ are chosen as potential H–SOFC cathode materials. Pr 0.8 Nd 0.2 BaFe 1.9 Zn 0.1 O 5+δ (PNBFZ) and PrBa 0.9 K 0.1 Fe 1.9 Zn 0.1 O 5+δ (PBKFZ) layered perovskite cathodes were synthesized using a nitrate-gel combustion method. Both PNBFZ and PBKFZ have a layered perovskite structure and are chemically compatible with protonic BaZr 0.1 Ce 0.7 Y 0.2 O 3−δ (BZCY) electrolyte. Both Nd and K doping dramatically improve the electrical conductivities under operation temperatures. Compared with PBKFZ, PNBFZ shows a lower average thermal expansion coefficient (TEC) of 13.9✕10 −6 K −1 , being thermally compatible with the BZCY electrolyte without cracks. A-site doping in Fe-based layered perovskite cathodes promotes the single-cell output performance by around 100-26% at 550–700 °C, especially for the mixed-rare-earth doped PNBFZ with high peak power densities of 401–650 mW cm −2 .
科研通智能强力驱动
Strongly Powered by AbleSci AI