Study of the Influence of Zirconium, Titanium and Strontium on the Properties and Microstructure of AlSi7Mg0.3Cu0.5 Alloy

The aim of the paper is to describe and specify the properties and microstructure of Al-Si alloy using Zr, a combination of Zr with elements used in the grafting of Al (Ti) alloys, and modification (Sr). Al-Si alloys with a combination of Zr and Ti and Sr elements represent an opportunity for the development of new aluminum alloys with a specific use. The experiment focused on the analysis of the synergistic effects of Zr with Ti and Zr with Sr on a AlSi7Mg0.3Cu0.5 alloy. The experimental alloys contained a constant Zr content of 0.15 wt. % and were alloyed with a gradual addition of Ti and Sr in the range of 0.1 to 0.3 wt. % for Ti, and 0.1 to 0.3 wt. % for Sr. The experimental samples were cast by meltable model casting technology. In variants with a constant addition of Zr 0.15 wt. % and a gradual addition of Ti, we observed an increase in the values of mechanical characteristics, with a significant decrease in ductility. When evaluating the structure of experimental alloys, Ti affected it by increasing the number of precipitated Zr phases. Experimental alloys with Zr and Sr addition were characterized by nucleation of Zr phases in angular morphology. It can be concluded that the investigated elements are expected to have a positive (strengthening) effect even at higher operating temperatures.