材料科学
合金
可塑性
极限抗拉强度
循环应力
冶金
硬化(计算)
镁合金
晶体孪晶
加工硬化
镁
压力(语言学)
复合材料
微观结构
语言学
哲学
图层(电子)
作者
Yu Lei,Ziyi Wang,Guozheng Kang
标识
DOI:10.1016/j.jma.2021.12.001
摘要
The uniaxial cyclic plasticity of cast AZ91 magnesium (Mg) alloy was investigated by conducting a series of cyclic straining and stressing tests at room temperature, and a unique cyclic plasticity (especially for ratchetting) and its physical nature were revealed. The experimental results demonstrate that the cast AZ91 Mg alloy behaviors tension-compression symmetry, because the dislocation slipping and twinning occur during both the tensile and compressive deformations; although the cast AZ91 alloy presents a certain pseudo-elastic behavior during unloading due to the detwinning, there is no obvious S-shaped asymmetric hysteresis loop like that of wrought Mg alloy in the cyclic tensile-compressive tests, and an obvious cyclic hardening is observed; moreover, the ratchetting of the cast AZ91 alloy presented in the cyclic stressing tests depends remarkably on the prescribed mean stress and stress amplitude, but slightly changes with the stress rate, and the evolution of responding peak/valley strain greatly differs from that of wrought Mg alloys and stainless steels. This work provides rich experimental data for establishing the constitutive model of cast Mg alloys.
科研通智能强力驱动
Strongly Powered by AbleSci AI