热阻
材料科学
毛细管作用
热流密度
散热片
机械
热的
热管
多孔性
绝热过程
传热
优化设计
形状优化
机械工程
复合材料
热力学
计算机科学
有限元法
工程类
物理
机器学习
作者
Tanya Liu,Mehdi Asheghi,Kenneth E. Goodson
出处
期刊:Langmuir
[American Chemical Society]
日期:2021-12-30
卷期号:38 (1): 221-230
被引量:8
标识
DOI:10.1021/acs.langmuir.1c02429
摘要
As electronic device power densities continue to increase, vapor chambers and heat pipes have emerged as effective thermal management solutions for hotspot mitigation. A crucial aspect of vapor chamber functionality depends on the properties of the microporous wick that drives heat and mass transport within the device. While many prior studies have focused on the optimization of these porous structures to increase the maximum capillary-limited dryout heat flux, an equally important aspect of porous wick design is the minimization of the thermal resistance above heated areas. Segmented wicks with geometries that vary along the length of the wick are attractive candidates that can potentially be used to fulfill these simultaneous design goals. Previous studies on bisegmented wicks with only two distinct adiabatic and heated region geometries, however, have shown mixed results regarding the degree of performance benefit over homogeneous wicks. In this work, we present a systematic modeling approach to investigate the optimal composition of segmented micropillar wicks comprising multiple, discrete regions of graded geometry. Using a genetic algorithm, we generate Pareto fronts of optimal segmented wick distributions that maximize the dryout heat flux and minimize the thermal resistance for a given heating configuration. We find that optimal, graded segmented wicks are capable of dissipating dryout heat fluxes more than 200% higher than baseline homogeneous wicks with significantly lower thermal resistance. The sensitivity of the wick performance to the total number of geometry segments is found to vary depending on the desired heat flux and thermal resistance operating regimes.
科研通智能强力驱动
Strongly Powered by AbleSci AI