锆钛酸铅
验证质量
悬臂梁
振动
声学
灵敏度(控制系统)
材料科学
噪音(视频)
弯曲
压电
加速度
弹簧(装置)
结构工程
电子工程
工程类
计算机科学
物理
光电子学
复合材料
图像(数学)
经典力学
电介质
铁电性
人工智能
作者
Yating Hu,Hongen Tu,Yong Ping Xu
标识
DOI:10.1088/0964-1726/25/9/095007
摘要
Abstract This paper reports the development of low-cost high-performance vibration sensors based on a cascaded asymmetric-gapped cantilever for low-frequency sensing. The cascaded structure is implemented to reduce the spring constant for a high sensitivity and simultaneously avoid the undesirable shear bending. A prototype with a proof mass of 40 g and an overall size of 124 mm × 39 mm × 5.1 mm ( l × w × t ) has been successfully constructed. The sensor body was made of aluminum and two lead zirconate titanate sheets were implemented as the sensing element. Based on a coherence method, a noise equivalent acceleration close to the theoretical value has been achieved at 35 Hz (~3 ng/√Hz). Finally, the prototype has been successfully demonstrated for ballistocardiogaph monitoring for both sitting and lying positions.
科研通智能强力驱动
Strongly Powered by AbleSci AI