材料科学
合金
极限抗拉强度
钽
微尺度化学
延伸率
钛合金
复合材料
模数
纳米尺度
相(物质)
微观结构
冶金
纳米技术
化学
有机化学
数学教育
数学
作者
M. A. Sevostyanov,А. С. Баикин,М. А. Каплан,А. Г. Колмаков,Sergey V. Gudkov,Максим Ребезов,Sergey V. Garnov
出处
期刊:Doklady Physics
[Pleiades Publishing]
日期:2021-01-01
卷期号:66 (1): 14-16
被引量:7
标识
DOI:10.1134/s1028335821010079
摘要
Abstract This alloy is shown to be homogeneous (Ti 65%, Nb 20%, Ta 10%, Zr 5%). A change in the elemental composition is observed only in the layer close to the surface with a thickness of about 100 nm. The alloy surface is depleted in titanium (∼20%) and enriched in tantalum (∼20%). There is also a large amount of oxides on the surface (∼50%). The alloy is single-phase with a β-Ti-type crystal lattice (cubic system, space group Im3m ). The alloy has yield strength of about 550 MPa and a tensile strength of about 700 MPa. The Young’s modulus is about 50 GPa. The relative elongation of the alloy is about 1.4%. On a microscale, folds and longitudinal comb-like structures up to 0.5 μm in height are found on the surface of wires and plates made of the Ti–20Nb–10Ta–5Zr alloy. When analyzing nanotopology, it is found that, even between comb-like structures or at their tops, there are irregularities up to 100–150 nm in height.
科研通智能强力驱动
Strongly Powered by AbleSci AI