季戊四醇
材料科学
苯胺
有机发光二极管
兴奋剂
溶剂
溶解度
化学工程
恶二唑
高分子化学
图层(电子)
阻燃剂
纳米技术
复合材料
物理化学
光电子学
化学
有机化学
工程类
作者
Jingyi Zhang,Hongli Liu,Xianggao Li,Shirong Wang
标识
DOI:10.1016/j.orgel.2021.106334
摘要
Since the inter-layer mutual solubility is an obstacle to the development of solution-processed OLED, cross-linking is considered to be the best method to obtain solvent resistance. Vinyl is the most widely reported crosslinking group, but a problem raised that crosslinking usually need a high temperature. Here, two vinyl-crosslinked hole transporting materials, 3,3'-(1,3,4-oxadiazole-2,5-diyl)bis (N-phenyl-N-(4-vinylphenyl)aniline) (OXZ-VPAN), 3,3'-(4-phenyl-4H-1,2,4-triazole-3,5-diyl)bis (N-phenyl-N-(4-vinylphenyl)aniline) (TRZ-VPAN) were designed and synthesized. The introduction of pentaerythritol tetra(3-mercaptopropionate) (PETMP) and vinyl groups by thiol-ene reaction to reduce the crosslinking temperature. As a result, crosslinking can be achieved at 120 °C with the solvent resistance higher than 99%. The surface morphology of the films before and after crosslinking were characterized by atomic force microscope, and it was found that the roughness of the film was improved after dopped with PETMP. The solution-processed green phosphorescent OLEDs devices based on the obtained HTM exhibit excellent performance. Maximum current efficiency of 57.1 cd A−1 and external quantum efficiency of 16.0% (Ir (mppy)3) are obtained when OXZ-VPAN served as HTL. This low temperature feasible cross-linking process to prepare HTLs promotes the development solution-processed OLEDs.
科研通智能强力驱动
Strongly Powered by AbleSci AI